Get acquainted with the PSØ21 and its PICOSTRAIN measuring principle. With PSA21 acam offers a convenient evaluation and measurement system, so you can test the full functionality and performance of the PSØ21. In combination, this gives you an adequate measurement system together with a powerful software that simplifies the handling of the various setup possibilities. The PSA21 is connected to a PC with a RS232 interface. Several settings for core and I/O supply voltage can be selected with jumpers. Further jumpers allow current measurement.

As reference frequency two clocks with 32,768 Hz or 4 MHz are available.

There is a BNC connector to trigger a single measurement by an external signal.

The system is offered with three plug-in modules:

• PSA21-STD with module for PICOSTRAIN standard bridge connection (separated halfbridges)
• PSA21-WSB with module for Wheatstone bridges
• PSA21-CAP with module for capacity measurements

• Features
• Software

Download datasheet as Acrobat PDF:

(~xxx KB, Jun 2005)